Replace Pool Table Pockets

How To Replace Pool Table Pockets?

Do you have a pool table that needs new pockets?

Whether your old pockets are worn out or you simply want to change the look of your table, replacing the pockets is a fairly easy process.

In this article, we will show you how to do it.

Are all pool table pockets the same size?

No, they are not all the same size. The pockets on a 9-foot pool table are typically 2 1/4 inches wide and 3/4 of an inch deep.

The pockets on an 8-foot pool table are typically 2 inches wide and 3/8 of an inch deep.

How do you put a pocket on a pool table?

There are a few ways to do this. One way is to use a pocket template. This is a piece of plastic or metal that has the shape of a pocket cut out of it.

You can then place this template on the table and trace around it with a marking pen. Once you have the outline of the pocket, you can use a drill to create the pocket hole.

Another way to put in pockets is by using screws. You can either screw the pocket directly into the slate bed of the table, or you can screw it into a wooden rail that runs along the edge of the table.

Whichever method you choose, make sure that you use screws that are long enough to go all the way through the table and into the substrate below.

Finally, you can also use a pool table pocket kit. This is a kit that includes all the parts and instructions you need to put pockets on your table. It includes a template, screws, and even a drill bit.

All you need to do is follow the instructions and you’ll have new pockets in no time!

How to replace pool table pockets?

If you’re looking to replace your pool table pockets, there are a few things you’ll need to take into consideration.

Pockets come in a variety of shapes and sizes, so you’ll need to find the right ones for your table.

You’ll also need to make sure the pockets are the right color and fabric to match your table.

Once you’ve found the right pockets, it’s time to remove the old ones. This can be a bit tricky, since the pockets are usually attached to the table with screws or staples.

Once you’ve removed the old pockets, it’s time to install the new ones. Again, this can be a bit tricky, since you’ll need to make sure they’re installed correctly and evenly.

How do you staple a pool table pocket?

There are a few different ways to staple a pool table pocket. One way is to use a regular stapler.

Another way is to use a special pocket stapler, which has a wider jaw and can staple the pocket more securely.

Whichever way you choose, make sure the staples are flush with the surface of the pocket so that they don’t interfere with the cue ball.

Don’t Miss This: How To Stretch Pool Table Felt?

Conclusion

So, there you have it. Everything you ever wanted to know about pool table pockets (and a little bit more).

Whether you’re in the market for a new pocket or just curious about how they’re made and installed, we hope this article has been helpful.

As always, feel free to leave any comments or questions below and we will do our best to answer them.

Rate This Post

Click on a star to rate it!

Average rating 0 / 5. Vote count: 0

No votes so far! Be the first to rate this post.

PoolCueChamp is reader-supported. We may earn a commission through products purchased using links on this page. Learn more about our Affiliate Disclosure

Leave a Comment

Your email address will not be published. Required fields are marked *